> >>2017

RECHERCHE PAR VEHICULE

Je connais l'année [recherche précise mais restreinte!]

NULL

Nouveaux produits

Informations

2017 Il y a 42 produits.

Sous-catégories

  • 848848
    Displacement848.0 ccm (51.74 cubic inches)
    CYLINDREE848.0 cm³
    Engine typeNCR-848 motor has titanium connecting rods carved out of billet, high compression forged pistons with single piston ring, titanium valves, ported heads, lightened gearbox, balanced crankshaft, custom wet-type slipper clutch by STM for NCR, full racing alu
    Engine detailsV2, four-stroke
    Power145.0 HP (105.8 kW)) @ 12500 RPM
    Torque120.0 Nm (12.2 kgf-m or 88.5 ft.lbs) @ 10000 RPM
    Fuel systemInjection. NCR Corse-EFI, EFI Euro 1, NCR Racing Harness with interface with AMI MXL PISTA display. NCR-EFI system accepts full mapping capabilities along with Lambda interface for closed loop mapping control.
    Cooling systemOil & air
    Transmission typeChain   (final drive)
    ClutchCustom wet-type slipper clutch by STM for NCR
    Exhaust systemTermignoni full racing system
    Front suspensionShowa original OEM fork with Ohlins-NCR internal damping systems. NCR fork bottoms from billet with 100 mm spacing. Triple clamps made from AL 7075 with adjustable offset from 28 to 36 mm in 1 mm increments.
    Rear suspensionOhlins TTX tuned by NCR
    Front tyre120/70-17
    Rear tyre180/55-17
    Front brakesSingle disc. WAVE Braking-NCR, radial Brembo Racing monoblock with billet NCR fork bottoms.
    Front brakes diameter300 mm (11.8 inches)
    Rear brakesSingle disc. WAVE Braking-NCR, Brembo Racng 2 piston.
    Rear brakes diameter200 mm (7.9 inches)
    WheelsMarchisini forged aluminum
    Dry weight155.0 kg (341.7 pounds)
    Power/weight ratio0.9355 HP/kg
    Color optionsOrange/white, green/white
    StarterElectric
    CommentsAdjustable rear sets in AL 7075 and titanium, gas cap assembly in AL 7075, clip-ons in AL 7075 with titanium tubes, fork bottoms in billet aluminum, triple clamps from AL 7075 with adjustable offset from 28 to 36 mm, steering damper with billet mount, custom wheel nuts, billet oil fill cover, rear subframe in aluminum, front fairing stay in aluminum. Poggipolini Titanium fasteners. Windscreen. The price price includes a new Ducati 848.
    ProfilationNCR was the official factory team of Dcati North America to compete in the PARTS CANADA SUPERBIKE CHAMPIONSHIP in the THUNDER Class. The team had two NCR 848´s that were developed specifically to develop the full catalog of parts for this exciting new bike.
  • LeggeraLeggera
    Displacement1078.0 ccm (65.78 cubic inches)
    CYLINDREE1078.0 cm³
    Engine typeDucati DS 1100 engine. Optional 125 HP bore.
    Engine detailsV2, four-stroke
    Power90.0 HP (65.7 kW)) @ 7750 RPM
    Valves per cylinder2
    Fuel systemInjection. Magneti Marelli, 45mm throttle bodies.
    Fuel controlDesmodromic valve control
    Cooling systemOil & air
    Gearbox6-speed
    Transmission typeChain   (final drive)
    Exhaust systemFull exhaust 2 into 1 into 2 configuration with catalitic converter and lambda system. Exhaust is in titanium and the mufflers are in carbon. Design by NCR and built by Zard, the silencers are 45% lighter than stock.
    Frame typeTrellis frame made entirely of Grade 9 Titanium.
    Front suspensionOhlins titanium nitride coated 46mm full adjustable with NCR Corse valving, adjustable offset NCR triple clamps made in avionic aluminum. NCR Corse billet fork bottoms
    Rear suspensionNCR- Ohlins monoshock, fully adjustable including low and high speed circuits and configured by NCR CORSE
    Front tyre120/70-R17
    Rear tyre180/55-R17
    Front brakesDouble disc. WAVE rotors, radial monoblock Brembo Racing calipers with 4 pistons and 2 pads.
    Front brakes diameter300 mm (11.8 inches)
    Rear brakesSingle disc. WAVE rotor, Brembo 2 piston caliper
    Rear brakes diameter200 mm (7.9 inches)
    WheelsCarbon fiber wheels from BST
    SeatBiposto leather seat by Schedoni per NCR.
    Dry weight157.0 kg (346.1 pounds)
    Power/weight ratio0.5732 HP/kg
    Wheelbase1400 mm (55.1 inches)
    Color optionsNCR Grey. Custom colors.
    StarterElectric
    CommentsOptional big bore kit to transform the stock 1100cc Ducati engine to 1160cc and increasing power from 90 to 125 hp. Or complete NCR Corse engine in 1200cc configuration complete with stroker crank and full NCR treatment increasing power from 90 to 132 hp while reducing weight by 10 kg (22 lbs).
    Profilation Project Tech Specs Gallery Order now your Leggera Customize your HYPERMOTARD LEGGERA Titanium frame, 157 kg (328 lbs). Starting from the Ducati Hypermotard concept bike, NCR introduces it´s first street!
  • M16M16
    Displacement998.0 ccm (60.90 cubic inches)
    CYLINDREE998.0 cm³
    Engine typeDucati Desmo16RR engine tuned by NCR
    Engine detailsIn-line four, four-stroke
    Power200.0 HP (146.0 kW)) @ 7600 RPM
    Fuel systemInjection. EFI
    Gearbox6-speed
    Transmission typeChain   (final drive)
    ClutchSlipper clutch
    Exhaust systemNCR full exhaust system in Titanium, 2 into 1, 2 into 1
    Frame typeCarbon fiber frame
    Front suspensionOhlins FGR000 43 mm with adjustable off-set, tuned by NCR CORSE
    Rear suspensionProgressive linkage with fully adjustable Ohlins TTX monoshock with length adjustment. Tuned by NCR CORSE
    Front tyre120/70-R17
    Rear tyre190/55-R17
    Front brakesSingle disc. Braketech AXIS/CMC (ceramic matrix composites) rotor , 2-piston Brembo Racing monoblock caliper
    Front brakes diameter220 mm (8.7 inches)
    Rear brakesSingle disc. Disco Braketech AXIS/CMC (ceramic matrix composites) disks. 2-piston Brembo Racing monoblock caliper
    Rear brakes diameter220 mm (8.7 inches)
    WheelsCarbon fiber wheels. Metzeler Racetec tyres.
    SeatLeather seat produced by Schedoni
    Dry weight145.0 kg (319.7 pounds)
    Power/weight ratio1.3793 HP/kg
    Wheelbase1430 mm (56.3 inches)
    Color optionsBlack
    StarterElectric
    CommentsFuel tank, subframe, fairing kit, front fender, seat tail/subframe and front fairing stay are completely made in carbon fiber. NCR Titanium rearset kit, NCR Titanium fuel cap, NCR Titanium clutch cover, NCR Titanium/Al 7075 clip on set, NCR triple clamps kit in aluminum from billet with special Nipploy treatment. Bolts and fastners completely produced in Titanium by Poggipolini. Adjustable traction control.
    ProfilationUpon closer inspection, you will note that this is no ordinary motorcycle. It was conceived from the start to be the most exclusive motorcycle in the world by using the strongest and lightest material in the world.
  • M4M4
    Displacement1100.0 ccm (67.12 cubic inches)
    CYLINDREE1100.0 cm³
    Engine typeDucati EVO 1100 engine.
    Engine detailsV2, four-stroke
    Power107.0 HP (78.1 kW)) @ 7500 RPM
    Torque115.0 Nm (11.7 kgf-m or 84.8 ft.lbs) @ 5100 RPM
    Compression10.0:1
    Valves per cylinder4
    Fuel systemInjection. EFI 45mm throttle bodies.
    IgnitionMagneti Marelli high speed cpu with traction control and NCR designed military wiring and connectors.
    Cooling systemOil & air
    Gearbox6-speed
    Transmission typeChain   (final drive)
    ClutchWet, Multiple Disc
    Emission detailsCatalytic converter
    Frame typeNCR titanium frame weight 4.8 Kg (10.6 lbs). Subframe: NCR titanium subframe with Schedoni leather seat on a carbon fiber base.
    Rake (fork angle)24.0°
    Front suspensionOhlins 43 mm upside-down fork with TiN surface treatment, adjustable off-set, radial calipers with NCR CORSE billet aluminum fork bottoms, tuned by NCR CORSE. Triple clamps made from billet AL 7075 with an adjustable offset of 24 to 32 mm in 2 mm incremen
    Rear suspensionFully adjustable Ohlins monoshock with eccentric adjustor. Tuned by NCR CORSE
    Front tyre120/70-R17
    Rear tyre190/55-R17
    Front brakesDouble disc. WAVE discs, 4-piston 2-pad Brembo SBK radial caliper from billet.
    Front brakes diameter300 mm (11.8 inches)
    Rear brakesSingle disc. WAVE disc, 2-piston Brembo caliper from billet..
    Rear brakes diameter200 mm (7.9 inches)
    WheelsBST-NCR Carbon fiber wheels
    SeatSchedoni leather seat on a carbon fiber base.
    Dry weight130.0 kg (286.6 pounds)
    Power/weight ratio0.8231 HP/kg
    Wheelbase1400 mm (55.1 inches)
    Fuel capacity13.00 litres (3.43 US gallons)
    Color optionsClear coat. Custom paint available.
    StarterElectric
    ElectricalLightweight lithium battery
    CommentsAdjustable rear sets in AL 7075 and titanium, gas cap assembly in aluminum from billet, clip-ons in AL 7075 with titanium tubes, triple clamps from AL 7075 with adjustable offset from 24 to 32 mm, Ohlins steering damper with billet mount in titanium, billet oil fill plug, front fairing stay in aluminum, NCR 32mm slave master machined from billet, titanium oil reservoirs. NCR custom oil cooler. Traction control
    ProfilationThe NCR M4 is modular in design in that the front headlight/instrument cluster can be changed to a mini, half or full fairing with the simple swap of two bolts and a connector. The same can be done with the tail section. The stock titanium rear subframe assembly can be swapped for a full carbon fiber street tail or carbon race tail with 5 bolts and a connector.
  • M4 One ShotM4 One Shot
    Displacement1100.0 ccm (67.12 cubic inches)
    CYLINDREE1100.0 cm³
    Engine typeDucati EVO 1100 engine.
    Engine detailsV2, four-stroke
    Power132.0 HP (96.4 kW)) @ 8700 RPM
    Torque143.0 Nm (14.6 kgf-m or 105.5 ft.lbs) @ 7000 RPM
    Compression10.0:1
    Valves per cylinder4
    Fuel systemInjection. EFI 45mm throttle bodies.
    IgnitionMagneti Marelli high speed cpu with traction control and NCR designed military wiring and connectors.
    Cooling systemOil & air
    Gearbox6-speed
    Transmission typeChain   (final drive)
    ClutchNCR-EVR dry-type slipper clutch
    Emission detailsCatalytic converter
    Exhaust systemNCR full stainless steel system with catalytic converter and exhaust valve 5.1 kg (11.2 lbs)
    Frame typeNCR titanium frame weight 4.8 Kg (10.6 lbs). Subframe: NCR titanium subframe with Schedoni leather seat on a carbon fiber base.
    Rake (fork angle)24.0°
    Front suspensionOhlins 43 mm upside-down fork with TiN surface treatment, adjustable off-set, radial calipers with NCR CORSE billet aluminum fork bottoms, tuned by NCR CORSE. Triple clamps made from billet AL 7075 with an adjustable offset of 24 to 32 mm in 2 mm incremen
    Rear suspensionFully adjustable Ohlins monoshock with eccentric adjustor. Tuned by NCR CORSE
    Front tyre120/70-R17
    Rear tyre190/55-R17
    Front brakesDouble disc. WAVE discs, 4-piston 2-pad Brembo SBK radial caliper from billet.
    Front brakes diameter300 mm (11.8 inches)
    Rear brakesSingle disc. WAVE disc, 2-piston Brembo caliper from billet..
    Rear brakes diameter200 mm (7.9 inches)
    WheelsBST-NCR Carbon fiber wheels
    SeatSchedoni leather seat on a carbon fiber base.
    Dry weight126.0 kg (277.8 pounds)
    Power/weight ratio1.0476 HP/kg
    Wheelbase1400 mm (55.1 inches)
    Fuel capacity13.00 litres (3.43 US gallons)
    Color optionsBlack. Custom paint available on request.
    StarterElectric
    ElectricalLightweight lithium battery
    CommentsCompletely using Poggipolini Titanium fasteners. Adjustable rear sets in AL 7075 and titanium, gas cap assembly in aluminum from billet, clip-ons in AL 7075 with titanium tubes, triple clamps from AL 7075 with adjustable offset from 24 to 32 mm, Ohlins steering damper with billet mount in titanium, billet oil fill plug, front fairing stay in aluminum, NCR 32mm slave master machined from billet, titanium oil reservoirs. NCR custom oil cooler. Traction control
    ProfilationThe NCR M4 One Shot comes with a NCR 1200, modified Ducati EVO 1100 engine complete with billet stroker crank, titanium connecting rods, high compressed 102mm pistons, titanium hardware throughout and NCR-EVR slipper clutch. The NCR M4 One Shot produces 132 hp at 8,700 rpm, torque of 105 ft-lbs of torque (143 Nm) and a weight of 278 lbs (126 kg).
  • Macchia Nera ConceptMacchia Nera Concept
    Displacement998.0 ccm (60.90 cubic inches)
    CYLINDREE998.0 cm³
    Engine typeDucati Testastretta 998R engine
    Engine detailsV2, four-stroke
    Power185.0 HP (135.0 kW))
    Valves per cylinder4
    Fuel systemInjection. EFI
    Cooling systemLiquid
    Gearbox6-speed
    Transmission typeChain   (final drive)
    Frame typeCarbon fibre and titanium
    Front suspensionCerchi Marvic
    Rear suspensionOhlins monoshock
    Front tyre120/70-R17
    Rear tyre190/55-R17
    Front brakesDouble disc. Brembo
    Front brakes diameter305 mm (12.0 inches)
    Rear brakesSingle disc. Brembo
    WheelsBlack, 5-spoke
    Dry weight135.0 kg (297.6 pounds)
    Power/weight ratio1.3704 HP/kg
    Wheelbase1400 mm (55.1 inches)
    Color optionsBlack/white/beige/gold
    StarterElectric
    LightNo lights
    ProfilationMacchia Nera. Italian for “Black Spot.”
  • Mike Hailwood TTMike Hailwood TT
    Displacement1120.0 ccm (68.34 cubic inches)
    CYLINDREE1120.0 cm³
    Engine typeDucati NCR 1120. Titanium connecting rods carved out of billet, high compression forged pistons with single piston ring, custom F1 type crankshaft from billet with longer stroke, NCR CORSE cams, titanium valves, ported heads.
    Engine detailsV2, four-stroke
    Power130.0 HP (94.9 kW)) @ 8700 RPM
    Torque135.0 Nm (13.8 kgf-m or 99.6 ft.lbs) @ 7000 RPM
    Valves per cylinder2
    Fuel systemInjection. NCR Corse-EFI, EFI Euro 1, NCR Racing Harness with interface with AMI MXL PISTA display. NCR-EFI system accepts full mapping capabilities along with Lambda interface for closed loop mapping control.
    Fuel controlDouble Overhead Cams/Twin Cam (DOHC)
    Cooling systemOil & air
    Gearbox6-speed
    Transmission typeChain   (final drive)
    Exhaust systemFull titanium exhaust system.
    Frame typeTitanium frame weighing only 5 Kg (11 lbs).
    Front suspensionOhlins FGR 900 pressurized MotoGP fork tuned by NCR. Triple clamps made from AL 7075 with adjustable offset from 28 to 36 mm in 1 mm increments.
    Rear suspensionOhlins dual shock tuned by NCR.
    Front tyre120/70-17
    Rear tyre190/55-17
    Front brakesSingle disc. WAVE Braking-NCR, radial Brembo Racing 4 piston monoblock
    Front brakes diameter300 mm (11.8 inches)
    Rear brakesSingle disc. WAVE Braking-NCR, Brembo Racng 2 piston monoblock
    Rear brakes diameter200 mm (7.9 inches)
    WheelsCarbon fiber wheels
    Dry weight136.0 kg (299.8 pounds)
    Power/weight ratio0.9559 HP/kg
    Wheelbase1390 mm (54.7 inches)
    Color optionsRed/green/white. Historical Mike Hailwood NCR colors with a pearl base. All air brushed.
    StarterElectric
    CommentsCarbon fiber bodywork. Poggipolini Titanium fastners. Limited edition.
    ProfilationOnly 12 MIKE HAILWOOD* TT motorcycles will be produced.
  • Millona One ShotMillona One Shot
    Displacement1100.0 ccm (67.12 cubic inches)
    CYLINDREE1100.0 cm³
    Engine typeDucati 1100 NCR engine
    Engine detailsV2, four-stroke
    Power116.0 HP (84.7 kW)) @ 8450 RPM
    Torque108.0 Nm (11.0 kgf-m or 79.7 ft.lbs) @ 6700 RPM
    Fuel systemInjection
    IgnitionAutomatic Remapping System (ARS) by on-board CPU.
    Gearbox6-speed
    Transmission typeChain   (final drive)
    ClutchNCR CORSE by Aptc anti hopping clutch system
    Exhaust systemExhaust system developed by NCR and produced in Titanium by Zard.
    Frame typeTubular trellis in chromium molybdenum projected and developed by NCR.
    Rake (fork angle)24.0°
    Front suspensionOhlins 43 mm upside-down fork with TiN surface treatment , adjustable off-set, for radial calipers with NCR CORSE alluminum bottom bracket from billet, seted up by NCR CORSE.
    Rear suspensionHandmade swingarm in alluminum projected and developed by NCR (weight: 3.8kg). Progressive linkage with fully adjustable Ohlins monoshock with lenght adjustment. seted up by NCR CORSE.
    Front tyre120/70-R17
    Rear tyre190/55-R17
    Front brakesDouble disc. WAVE discs, 4-piston 2-pad Brembo SBK radial caliper from billet.
    Front brakes diameter300 mm (11.8 inches)
    Rear brakesSingle disc. WAVE disc, 2-piston Brembo caliper from billet.
    Rear brakes diameter200 mm (7.9 inches)
    WheelsCarbon fiber wheels. Metzeler Racetec Slick K0 tyres.
    SeatLeather seat produced by Schedoni.
    Dry weight125.0 kg (275.6 pounds)
    Power/weight ratio0.9280 HP/kg
    Wheelbase1400 mm (55.1 inches)
    Fuel capacity15.00 litres (3.96 US gallons)
    Color optionsWhite/orange, white/green
    StarterElectric
    CommentsElectronic engine starter not included. Fuel tank, subframe, fearing kit, belly pan, front mud-guard, seat tail and airbox kit in carbon fiber. Titanium bolts.
    ProfilationNCR CORSE Race pilot-customers will be able to even improve their results on the track, thanks to an even better power to weight ratio. In the ONE SHOT model it reaches the incredible figure of 116 HP for 125 Kg.
  • Millona RMillona R
    Displacement1000.0 ccm (61.02 cubic inches)
    CYLINDREE1000.0 cm³
    Engine typeDucati 1000DS engine.
    Engine detailsV2, four-stroke
    Power100.0 HP (73.0 kW)) @ 7600 RPM
    Torque92.0 Nm (9.4 kgf-m or 67.9 ft.lbs) @ 6400 RPM
    Compression10.0:1
    Valves per cylinder2
    Fuel systemInjection. EFI Magneti Marelli, 45mm throttle bodies.
    Cooling systemAir
    Gearbox6-speed
    Transmission typeChain   (final drive)
    Exhaust system37288
    Frame typeTubular trellis in chromium molybdenum projected and developed by NCR.
    Rake (fork angle)24.0°
    Front suspensionOhlins 43 mm upside-down fork with TiN surface treatment , adjustable off-set, for radial calipers with NCR CORSE alluminum bottom bracket from billet, seted up by NCR CORSE.
    Rear suspensionProgressive linkage with fully adjustable Ohlins monoshock with lenght adjustment. seted up by NCR CORSE.
    Front tyre120/70-R17
    Rear tyre190/55-R17
    Front brakesDouble disc. WAVE discs, 4-piston 2-pad Brembo SBK radial caliper from billet.
    Front brakes diameter300 mm (11.8 inches)
    Rear brakesSingle disc. WAVE disc, 2-piston Brembo caliper from billet..
    Rear brakes diameter200 mm (7.9 inches)
    WheelsForged Magnesium wheels. Metzeler Racetec Slick K0 tyres.
    SeatLeather seat produced by Schedoni.
    Dry weight135.0 kg (297.6 pounds)
    Power/weight ratio0.7407 HP/kg
    Wheelbase1400 mm (55.1 inches)
    Fuel capacity15.00 litres (3.96 US gallons)
    Color optionsCarbon fiber look with transparent paint.
    StarterElectric
    CommentsFuel tank, subframe, fearing kit, belly pan, front mud-guard, seat tail and airbox kit in carbon fiber. Bolts and fastners in Titainum.
    ProfilationEach MILLONA is entirely hand built, by NCR technicians, with utmost attention and care for the smallest detail and particular. Each bike is numbered.
  • Millona SMillona S
    Displacement1000.0 ccm (61.02 cubic inches)
    CYLINDREE1000.0 cm³
    Engine typeDucati 1000DS engine
    Engine detailsV2, four-stroke
    Power100.0 HP (73.0 kW)) @ 7600 RPM
    Torque92.0 Nm (9.4 kgf-m or 67.9 ft.lbs) @ 6400 RPM
    Valves per cylinder2
    Fuel systemInjection. EFI Magneti Marelli, 45mm throttle bodies.
    Cooling systemAir
    Gearbox6-speed
    Transmission typeChain   (final drive)
    Exhaust systemExhaust system developed by NCR and produced in Inox by Zard.
    Frame typeTubular trellis in chromium molybdenum projected and developed by NCR. Handmade swingarm in alluminum.
    Rake (fork angle)24.0°
    Front suspensionOhlins 43 mm upside-down fork with TiN surface treatment, for radial calipers.
    Rear suspensionHandmade swingarm in alluminum projected and developed by NCR (weight: 3.8kg). Progressive linkage with fully adjustable Ohlins monoshock with lenght adjustment.
    Front tyre120/70-R17
    Rear tyre190/55-R17
    Front brakesDouble disc. Braking WAVE discs, 4-piston 4-pad Brembo radial caliper.
    Front brakes diameter320 mm (12.6 inches)
    Rear brakesSingle disc. Braking WAVE disc, 2-piston Brembo caliper.
    Rear brakes diameter200 mm (7.9 inches)
    WheelsMARCHESINI M10R Forged Aluminum wheels. Metzeler Racetec Slick K0 tyres.
    SeatLeather seat produced by Schedoni.
    Dry weight145.0 kg (319.7 pounds)
    Power/weight ratio0.6897 HP/kg
    Wheelbase1400 mm (55.1 inches)
    Fuel capacity15.00 litres (3.96 US gallons)
    Color optionsBlack or custom
    StarterElectric
    InstrumentsMyChron3 Visor with via Can to EFI Euro 1 cpu connection and USB PC connection.
    CommentsBolts and fasteners produced in Al 7075 and in Titanium.
    ProfilationNCR managed to built the only, true, thrilling racing bike.
  • New BlueNew Blue
    Displacement1100.0 ccm (67.12 cubic inches)
    CYLINDREE1100.0 cm³
    Engine typeDucat NCR 1100 engine
    Engine detailsV2, four-stroke
    Power116.0 HP (84.7 kW)) @ 8450 RPM
    Torque106.0 Nm (10.8 kgf-m or 78.2 ft.lbs) @ 6700 RPM
    Fuel systemInjection
    IgnitionNCR CORSE wiring system with Automatic Remapping System (ARS) by on-board CPU .
    Cooling systemLiquid
    Gearbox6-speed
    Transmission typeChain   (final drive)
    ClutchSlipper clutch
    Exhaust systemNCR titanium exhaust system produced by Zard
    Frame typeTubular trellis in steel Ducati Sport 1000 S model
    Rake (fork angle)24.0°
    Front suspensionOhlins 43 mm upside-down fork with TiN surface treatment, adjustable off-set, for radial calipers with NCR CORSE aluminum bottom bracket from billet, tuned by NCR CORSE
    Rear suspensionProgressive linkage with fully adjustable Ohlins monoshock with length adjustment. Tuned by NCR CORSE.
    Front tyre120/70-R17
    Rear tyre190/55-R17
    Front brakesDouble disc. WAVE discs, 4-piston 2-pad Brembo SBK radial caliper from billet
    Front brakes diameter300 mm (11.8 inches)
    Rear brakesSingle disc. WAVE disc, 2-piston Brembo caliper from billet
    Rear brakes diameter200 mm (7.9 inches)
    WheelsCarbon fiber wheels. Metzeler Racetec Slick K0 tyres.
    SeatLeather seat by Schedoni
    Dry weight145.0 kg (319.7 pounds)
    Power/weight ratio0.8000 HP/kg
    Wheelbase1400 mm (55.1 inches)
    Fuel capacity15.00 litres (3.96 US gallons)
    Color optionsBlue comet/white, Silver race/pearl
    StarterElectric
    InstrumentsAIM MXL dashboard with via Can to EFI Euro 1 cpu connection and USB PC connection.
    CommentsNCR Al 7075/Titanium footrests kit, NCR Al7075/Titanium fuel cap, NCR Titanium clutch cover, NCR Titanium/Al 7075 clip on set, NCR triple clamps kit in alluminum from billet, NCR CORSE bottom bracket in alluminum from billet,NCR CORSE camshaft and Magnesium NCR clutch and alternator case. Poggipolini Group production. Handmade on demand and limited to 50 numbered bikes..
    ProfilationThe engine is the new 1100NCR, components and braking system are of racing origin: everything is made in Ohlins, Brembo and Poggipolini Titanium. The exhaust system is an extraordinary titanium 2-1-2, weighing 4 kg. The bike will be sold “ready to race”.
par page
Résultats 1 - 42 sur 42.
Résultats 1 - 42 sur 42.